Sap Encapsulations And Pseudowire Types; Qos Policies; Egress Network Exp Marking; Figure 11 Sdp Statistics For Vpls And Vll Services - Nokia 7302 Manual

Virtual Leased Line Services
Figure 11
4.3.2
The Epipe service is designed to carry Ethernet frame payloads, so it can provide
connectivity between any two SAPs that pass Ethernet frames. The following SAP
encapsulation is supported on the Epipe service:
•
Note that while different encapsulation types do exist, encapsulation mismatching
can occur if the encapsulation behavior is not understood by connecting devices and
are unable to send and receive the expected traffic.
4.3.3
4.3.3.1
A service egress network QoS policy defines the match criteria used to determine the
mapping of Flow Class and profile indication to EXP bits. Marking of the EXP bits in
both labels (transport and VC) of the PW is performed. The operator can configure
egress network QoS policy for the service. By default each Epipe service is
associated the default egress network QoS policy: policy ID 1.
110
SDP Statistics for VPLS and VLL Services
VPLS1
VPLS2
PE1
SDP 101
LDP
PE2
VPLS1

SAP Encapsulations and Pseudowire Types

Ethernet dot1q

QoS Policies

Egress Network EXP Marking

3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
SDP 103
LDP
IP/MPLS
SDP 102
LDP
VPLS2
VPLS1
VPLS2
PE3
Issue: 13