Configuring Eth-Cfm With Cli; Create A Maintenance Domain; Create A Maintenance Association - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
3.10.1
This section provides information to configure global ETH-CFM parameters using the
Command Line Interface (CLI).
Topics in this section include:
•
•
3.10.1.1
The first step in enabling CFM is to create the MD. Each MD created in the system
has an index, a name, and an MD level. When defining an MD in a system, the level
of the MD must be specified. One MD can contain one or more Maintenance
Associations (MAs). All MAs that belong to the same MD have the same MD level.
Use the following CLI syntax to create a Maintenance Domain.
configure>eth-cfm# info
----------------------------------------------
domain 10 format none level 0
exit
3.10.1.2
After the MD has been created, the MA can be created under the MD. Three items
must be explicitly configured in the MA definition:
•
•
•
Use the following CLI Syntax to create a Maintenance Association
config>eth-cfm# info
----------------------------------------------
Issue: 13

Configuring ETH-CFM with CLI

Create a Maintenance Domain

Create a Maintenance Association

Create a Maintenance Domain
Create a Maintenance Association
MA Name:
The MAID is formed by the MA name and the MD level.
Bridge Identification:
The identification of the service in which the MA is deployed
Remote MEP ID:
The list of IDs for all remote MEPs that belong to this MA.
domain 10 format none level 0
association 1 format string name "vpls5"
bridge-identifier 10
remote-mepid 1
exit
exit
3HH-11985-AAAA-TQZZA
Services Overview
63