Table 134 Extfwd Command; Table 135 Device-Ip Command; Table 136 Fdb-Table-Size Command; Extfwd - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
5.16.2.11
Table 134
5.16.2.12
Table 135
5.16.2.13
Table 136
(1 of 2)
Issue: 13

extfwd

extfwd command
Item Description
Syntax extfwd
Context configure>service>vpls
Description This command enables the context to configure External Packet Forwarding (EPF) policies.
device-ip
device-ip command
Item Description
Syntax device-ip ip-address
no device-ip
Context configure>service>vpls>extfwd
Description This command enables External Packet Forwarding (EPF) for voice traffic and disables
hair-pinning on the v-VPLS service. The IP address configured with this command will act as
the next-hop for all up-stream packets (both signaling and voice) from the voice LTs in the
v-VPLS. This command is supported only on a v-VPLS service and not on a VPLS service.
Parameters ip-address — Specifies the IPv4 unicast address.
fdb-table-size
fdb-table-size command
Item Description
Syntax fdb-table-size table-size
no fdb-table-size
Context configure>service>vpls
Description This command specifies the maximum number of MAC entries in the forwarding database
(FDB) for the v-VPLS instance on this node.
The fdb-table-size specifies the maximum number of forwarding database entries for both
learned and static MAC addresses for the v-VPLS instance.
The no form of this command returns the maximum FDB table size to default.
Default 250
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
257