Clear Commands - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
7.10.13
7.10.13.1
Table 672
7.10.13.2
Table 673
Issue: 13
Label
Info Option
Admin State

Clear Commands

arp
arp command
Item Description
Syntax arp {all | ip-address}
arp interface [ip-int-name | ip-address]
Context clear>router
Description This command clears all or specific ARP entries.
The scope of ARP cache entries cleared depends on the command line option(s) specified.
Parameters all — Clears all ARP cache entries.
ip-addr — Clears the ARP cache entry for the specified IP address.
interface ip-int-name — Clears all ARP cache entries for the interface with the specified name.
interface ip-addr — Clears all ARP cache entries for the specified interface with the specified
address.
dhcp6
dhcp6 command
Item Description
Syntax dhcp6
Context clear>router
Description This command enables the context to clear and reset DHCP6 entities.
3HH-11985-AAAA-TQZZA
Description
Indicates whether Option 82 is enabled.
Indicates the administrative status.
Virtual Private Routed Network Service
603