Table 528 Multihop Command; Table 529 Multipath Command; Multihop - Nokia 7302 Manual

Virtual Private Routed Network Service
(2 of 2)
7.10.9.31
Table 528
7.10.9.32
Table 529
(1 of 2)
516
Item Description
Parameters seconds — The minimum route advertising interval, in seconds, expressed as a decimal
integer.
Values: 1 — 255

multihop

multihop command
Item Description
Syntax multihop ttl-value
no multihop
Context configure>service>vprn>bgp
configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
Description This command configures the time to live (TTL) value entered in the IP header of packets sent
to an EBGP peer multiple hops away.
This parameter is meaningful only when configuring EBGP peers. It is ignored if set for an
IBGP peer.
The no form of the command is used to convey to the BGP instance that the EBGP peers are
directly connected.
The no form of the command reverts to default values.
Default 1 — EBGP peers are directly connected.
64 — IBGP
Parameters ttl-value — The TTL value, expressed as a decimal integer.
Values: 1 — 255
multipath
multipath command
Item Description
Syntax multipath max-paths
no multipath
Context configure>service>vprn>bgp
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13