Table 543 Advertise-Subnet Command; Table 544 Authentication-Key Command; Advertise-Subnet - Nokia 7302 Manual

Intelligent services access manager/fttn/fx, fd 100/320gbps nt and fx nt ihub services
Hide thumbs Also See for 7302:
Table of Contents

Advertisement

Virtual Private Routed Network Service
(2 of 2)
7.10.10.6
Table 543
7.10.10.7
Table 544
(1 of 2)
524
Item
Description
Description
This command creates a context to configure an OSPF interface.
By default interfaces are not activated in any interior gateway protocol such as OSPF unless
explicitly configured.
The no form of the command deletes the OSPF interface configuration for this interface. The
shutdown command in the configure>router>ospf>interface context can be used to disable an
interface without removing the configuration for the interface.
Default
no interface — No OSPF interfaces are defined.
Parameters
ip-int-name — The IP interface name. Interface names must be unique within the group of
defined IP interfaces for configure router interface and configure service vprn interface
commands. An interface name cannot be in the form of an IP address. Interface names can be
any string up to 32 characters long composed of printable, 7-bit ASCII characters. If the string
contains special characters (#, $, spaces, etc.), the entire string must be enclosed within
double quotes.
If the IP interface name does not exist or does not have an IP address configured, an error
message will be returned.
If the IP interface exists in a different area, it will be moved to this area.

advertise-subnet

advertise-subnet command
Item
Description
Syntax
[no] advertise-subnet
Context
configure>service>vprn>ospf>area>interface
Description
This command enables advertising point-to-point interfaces as subnet routes (network number
and mask). When disabled, point-to-point interfaces are advertised as host routes.
The no form of the command disables advertising point-to-point interfaces as subnet routes
meaning they are advertised as host routes.
Default
advertise-subnet — Advertises point-to-point interfaces as subnet routes.
authentication-key
authentication-key command
Item
Description
Syntax
authentication-key [authentication-key | hash-key] [hash2]
no authentication-key
Context
configure>service>vprn>ospf>area>interface
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

73307360

Table of Contents