Nokia 7302 Manual page 187

FD 100/320Gbps NT and FX NT IHub Services Guide
The following configuration elements can be specified for m-VPLS after the service
is created:
•
•
•
The following parameters and configuration elements can be modified or configured
after a v-VPLS or a VPLS is created:
•
•
•
•
•
•
•
The following example displays a sample configuration of a distributed VPLS service
between ALA-1, ALA-2, and ALA-3.
*A:ALA-1>config>service# info
----------------------------------------------
...
The following example displays a sample configuration of a distributed VPLS
service between
ALA-1, ALA-2, and ALA-3.
*A:ALA-1>config>service# info
----------------------------------------------
...
----------------------------------------------
*A:ALA-1>config>service#
Issue: 13
service description
STP, RSTP or MSTP instances
admin status up or down
Since the m-VPLS does not forward traffic, it has no
Note —
FDB. Therefore MAC learning, aging, and user-to-user control
are not relevant. Configuration of static MAC addresses on
m-VPLS is not allowed either.
service description
user-to-user communication
FIB size
MAC learning and aging
MFIB table size
IGMP snooping
admin status up or down
vpls 9000 customer 6 create
shutdown
description "This is a distributed VPLS."
def-mesh-vc-id 750
stp
shutdown
exit
sap lt:1/1/5:16 create
description "VPLS SAP"
exit
spoke-sdp 2:22 create
exit
mesh-sdp 7:750 create
exit
exit
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
187