Services Overview
(2 of 2)
3.17.4.12
Table 28
3.17.4.13
Table 29
92
Item
Description
Default
7
Parameters
priority — <0,1,2...7>
period
period command
Item
Description
Syntax
period period
Context
configure>eth-cfm>y1731pm>domain
Description
The value of period specifies the time to wait between the transmission of one OAM request
and the next. This parameter can be set only when admin status is set to disabled. The
applicability, range, and default value of this object vary with type, as described below.
The no form of the command reverts the value to the default.
Default
two-way-slm — 1
two-way-delay — 1
single-end-loss — 60
Parameters
two-way-slm (SLM) — 1...10
two-way-delay (DM) — 1...10
single-end-loss (LM) — 60...300
data-size
data-size command
Item
Description
Syntax
data-size data-size
Context
configure>eth-cfm>y1731pm>domain
Description
Specifies the number of octets in the Value field of the Data TLV of the Ethernet CFM packet.
If zero is specified, the packet has no Data TLV.
This parameter is optional and is valid only if type is specified as two-way-slm.
The no form of the command reverts the value to the default.
Default
0
Parameters
data-size — [0...1500]
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13