Virtual Private Routed Network Service
(2 of 2)
7.10.5
7.10.5.1
Table 461
7.10.5.2
Table 462
480
Item
Description
Context
configure>service>vprn>if>dhcp
Description
This command disables the remote ID check in the interface.
Local proxy ARP should be enabled in the respective interface.
Default
Remote ID check is enabled (no rid-check-disable)
Parameters
None
VPRN Interface ICMP Commands
icmp
icmp command
Item
Description
Syntax
icmp
Context
configure>service>vprn>interface
Description
This command enables the context to configure Internet Control Message Protocol (ICMP)
parameters on an VPRN service
mask-reply
mask-reply command
Item
Description
Syntax
[no] mask-reply
Context
configure>service>vprn>interface>icmp
Description
This command enables responses to Internet Control Message Protocol (ICMP) mask
requests on the router interface.
If a local node sends an ICMP mask request to the router interface, the mask-reply command
configures the router interface to reply to the request.
By default, the router instance will reply to mask requests.
The no form of this command disables replies to ICMP mask requests on the router interface.
Default
mask-reply — Reply to ICMP mask requests.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13