Table 273 Stp Command; Table 274 Show Service-Id Stp Command Output Fields - Nokia 7302 Manual

Intelligent services access manager/fttn/fx, fd 100/320gbps nt and fx nt ihub services
Hide thumbs Also See for 7302:
Table of Contents

Advertisement

FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
5.16.7.11
Table 273
Table
Table 274
(1 of 2)
Issue: 13
Label
Description
Measure-time
The amount of time, measured in seconds that statistics for this entry have been
actually counted for the 1-day interval. This value will be the same as the interval
except in a situation where performance monitoring data could not be collected for this
SAP for some reason
stp
stp command
Item
Description
Syntax
stp [detail]
stp mst-instance mst-inst-number
Context
show>service>id
Description
This command displays information for the spanning tree protocol instance for the service.
Parameters
detail - Displays detailed information.
mst-inst-number - [1..4093]
274
describes the command output fields.
Show Service-ID STP Command Output Fields
Label
Description
RSTP Admin State
Indicates the administrative state of the Rapid Spanning Tree Protocol instance
associated with this service.
Core Connectivity
Indicates the connectivity status to the core.
RSTP Oper State
Indicates the operational state of the Rapid Spanning Tree Protocol instance
associated with this service. This field is applicable only when STP is enabled on the
router.
Bridge-id
Specifies the MAC address used to identify this bridge in the network.
Hold Time
Specifies the interval length during which no more than two Configuration BPDUs shall
be transmitted by this bridge.
Bridge fwd delay
Specifies how fast a bridge changes its state when moving toward the forwarding state.
Bridge Hello time
Specifies the amount of time between the transmission of Configuration BPDUs.
Bridge max age
Specifies the maximum age of Spanning Tree Protocol information learned from the
network on any port before it is discarded. This is the actual value that this bridge is
currently using.
Bridge priority
Defines the priority of the Spanning Tree Protocol instance associated with this service.
Topology change
Specifies whether a topology change is currently in progress.
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
331

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

73307360

Table of Contents