3.12 Dhcp Lease Query; Figure 7 Dhcp Lease Query - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
*A:FAD-Chassis>configure>eth-ring>path# eth-cfm
*A:FAD-Chassis>configure>eth-ring>path>eth-cfm# mep 11 domain 100
association 1
*A:FAD-Chassis>configure>eth-ring>path>eth-cfm>mep# control-mep
*A:FAD-Chassis>configure>eth-ring>path>eth-cfm>mep# no shutdown
*A:FAD-Chassis# configure service vpls 1002 customer 1 v-vpls vlan 1002
*A:FAD-Chassis>configure>service>vpls$ sap lag-30:1002
MINOR: SVCMGR #1602 The SAP-id is already in use - lag-30:1002 is already
configured under Ethernet ring 10
*A:FAD-Chassis>configure>service>vpls$ sap lag-30:1002 eth-ring 10
*A:FAD-Chassis>configure>service>vpls>sap$
*A:FAD-Chassis>configure>service>vpls>sap$ exit
*A:FAD-Chassis>configure>service>vpls# no shutdown

3.12 DHCP Lease Query

DHCP Lease Query allows ISAM to learn backs its DHCP IPv4 bindings, IPv6
bindings, and IPV6 PD routes, from the configured DHCP servers using lease query
after power on reset.
Figure 7 DHCP Lease Query
ONU
Legend:
Broadcast MAC/Broadcast IP Lease Query (UDP)
Unicast MAC/Unicast IP Lease Query (UDP/TCP)
Unicast MAC/Unicast IP Lease Query Response (UDP/TCP)
Unicast MAC (LT MAC)/Broadcast IP Lease Query Response (UDP)
LQ Request flow
IHUB involves transactions in this lease query only when L3 DHCP relay is enabled,
and supports DHCPv4 single lease query based on IP address, and DHCPv4 and
DHCPv6 bulk lease query based on remote ID. Lease query based on other options
is not supported. IHUB involves transactions in this lease query only in base router
(IES) context, and maintains a maximum of 95 lease query sessions. That is to say,
Issue: 13
DHCP Relay/
Agent
LT LT Port
3HH-11985-AAAA-TQZZA
NT
Base Route (Core 1)
IP Routing
NP
Network port
Services Overview
DHCP
server
DHCP
server
71