Table 694 Mirror-Source Command; Table 695 Port Command; Debug Configuration Commands - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
8.7.3
8.7.3.1
Table 694
8.7.3.2
Table 695
(1 of 2)
Issue: 13

Debug Configuration Commands

mirror-source
mirror-source command
Item Description
Syntax [no] mirror-source service-id
Context debug
Description This command configures mirror source parameters for a mirrored service.
The mirror-source command is used to enable mirroring of packets specified by the
association of the mirror-source to sources of packets defined within the context of the
mirror-dest-service-id. The mirror destination service must already exist within the system.
The mirror-source configuration is not saved when a configuration is saved. A mirror-source
manually configured within an ASCII configuration file will not be preserved if that file is
overwritten by a save command. Define the mirror-source within a file associated with a
configure exec command to make a mirror-source persistent between system reboots.
By default, all mirror-dest service IDs have a mirror-source associated with them. The
mirror-source is not technically created with this command. Instead the service ID provides a
contextual node for storing the current mirroring sources for the associated mirror-dest service
ID. The mirror-source is created for the mirror service when the operator enters the
debug>mirror-source svcId for the first time. The mirror-source is also automatically
removed when the mirror-dest service ID is deleted from the system.
The no form of the command deletes all related source commands within the context of the
mirror-source service-id. The command does not remove the service ID from the system.
Default No mirror source match criteria is defined for the mirror destination service.
Parameters service-id - The mirror destination service ID for which match criteria will be defined. The
service-id must already exist within the system.
Values: 1 — 2147483648. The service ID must already exist as a mirror-dest.
port
port command
Item Description
Syntax port {port-id | lag lag-id} {[egress] [ingress]}
no port {port-id | lag lag-id} [egress] [ingress]
Context debug>mirror-source
3HH-11985-AAAA-TQZZA
Mirror Services
621