Deleting A Vpls Service Or Sap - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
For example:
configure service vpls 1
configure service vpls 1 shutdown
configure>service>vpls1>exit
5.9.3
A VPLS service cannot be deleted until SAPs are unbound (deleted), interfaces are
shutdown, and the service is shutdown on the service level.
The following is an example of the CLI syntax to delete a VPLS service:
configure service no vpls <service-id>
The following is an example of the CLI syntax to delete a VPLS SAP:
configure service vpls <service-id> no sap {<port-id> | <lag-id>}:vlanid
The following is an example of the command output:
ALA-A>configure>service>vpls# info
----------------------------------------------
----------------------------------------------
ALA-A>configure>service>vpls#
5.9.4
You can view information about an m-VPLS or v-VPLS, including the following:
•
•
•
•
•
•
The show service command with one of the applicable parameters can be used to
view VPLS information:
show service id <service-id> {all | base | fdb | igmp-snooping | mfib |
mstp-configuration | sap | stp | service-using | sap-using}
The following example shows the information for a v-VPLS forwarding database:
Issue: 13

Deleting a VPLS Service or SAP

configure>service
no vpls service-id
shutdown
no sap service-id
description "SAP"
shutdown
Showing VPLS information
FDB database and MAC forwarding information (not applicable for m-VPLS)
all services
base services
fdb sap specific details
services using m-VPLS
services using v-VPLS
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
219