Table 387 Lease-State Command - Nokia 7302 Manual

Internet Enhanced Service
(2 of 2)
6.10.9.9
Table 387
(1 of 2)
406
Item Description
Parameters sap sap-id — Specifies the physical port identifier portion of the SAP definition.
Values: [port-id | lag-id] vlanid | no-tag
•
port-id
Specifies the physical port ID in the following format:
<port-id> : <nwport-id | ltport-id>
nwport-id - <slot-address>:<port-type>:<port-num>
— slot-address - nt|nt-a|nt-b|ntio-1
— port-type - sfp | xfp |vp | eth | ieee1588 | AI
— port-num - port-number
ltport-id - lt:<rack>/<shelf>/<slot>
— lt - keyword
— rack - number identifying the rack
— shelf - number identifying the shelf
— slot - number identifying the slot
•
lag-id
lag: keyword
id: 1 — 64
•
vlanid
Specifies the VLAN ID to be associated with the port identified by the SAP. For v-VPLS,
the SAP VLAN ID must match the VLAN ID defined at the v-VPLS level. The null value can
also be specified, to indicate that the SAP will send and receive untagged frames. If this
SAP is not defined, untagged frames will be dropped.
The m-VPLS VLAN ID is always specified as no-tag, which is reserved for untagged L2CP
frames processed to be by the m-VPLS.
Values:
m-VPLS vlanid: no-tag
v-VPLS vlanid: 0 | 1— 4093 (0 specifies untagged frames)
interface interface-name — Displays information for the specified IP interface.
lease-state
lease-state command
Item Description
Syntax lease-state [sap sap-id | interface interface-name | ip-address ip-address[/mask] | chaddr
ieee-address |mac ieee-address | {[port port-id] }] [detail]
Context show>service>id>dhcp
Description This command displays DHCP lease state related information.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13