Deleting Lsps; 3.9 Basic Configuration - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
configure>router>mpls# static-lsp to-headquarters
configure>router>mpls>static-lsp# push 105 nexthop 138.3.5.27
configure>router>mpls>static-lsp# to 1.1.1.1
configure>router>mpls>static-lsp# no shutdown
3.8.4.6
The no form of the lsp command removes an LSP ID and all associated information.
Before an LSP can be deleted, the LSP must be removed from all SDP associations.
The SDP must be administratively disabled before deleting LSPs.
configure>router# mpls
[no] static-lsp lsp-name
shutdown
configure>service# sdp sdp-id
[no] lsp lsp-name
Example:
configure>service# sdp 79
configure>service>sdp# no lsp 123
configure>service>sdp# exit all
# configure router
configure>router# mpls
configure>router>mpls# static-lsp 123
configure>router>mpls>static-lsp# shutdown
configure>router>mpls>static-lsp# exit
configure>router>mpls# no static-lsp 123

3.9 Basic Configuration

The most basic service configuration must have the following:
•
•
•
•
•
•
The following example provides an Epipe service configuration displaying the SDP
and Epipe service entities. SDP ID 2 was created with the far-end node
10.10.10.104. Epipe ID 6000 was created for customer ID 6 which uses the SDP ID
2.
A:ALA-B>configure>service# info detail
#------------------------------------------
...
Issue: 13

Deleting LSPs

A customer ID
A service type
A service ID
A SAP identifying a port and encapsulation value
An interface (where required) identifying an IP address, IP subnet, and broadcast
address.
For distributed services: an associated SDP
sdp 2 mpls create
3HH-11985-AAAA-TQZZA
Services Overview
59