Virtual Private Routed Network Service
Table 450
7.10.3.9
Table 451
7.10.3.10
Table 452
(1 of 2)
474
loopback command
Item
Description
Syntax
[no] loopback
Context
configure>service>vprn>interface
Description
This command specifies that the associated interface is a loopback interface that has no
associated physical interface. As a result, the associated interface cannot be bound to a SAP.
When using mtrace/mstat in a Layer 3 VPN context then the configuration for the VPRN should
have a loopback address configured which has the same address as the core instance's
system address (BGP next-hop).
proxy-arp-policy
proxy-arp-policy command
Item
Description
Syntax
proxy-arp-policy policy-name [policy-name...(up to 5 maximum)]
no proxy-arp-policy-name
Context
configure>service>vprn>interface
Description
This command enables a proxy ARP policy for the interface.
The no form of this command disables the proxy ARP capability.
Default
no proxy-arp-policy
remote-proxy-arp
remote-proxy-arp command
Item
Description
Syntax
remote-proxy-arp
[no] remote-proxy-arp
Context
configure>service>vprn>interface
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13