FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
7.10.3.11
Table 453
(1 of 2)
Issue: 13
Item
Description
Description
This command enables remote proxy ARP on the interface.
Remote proxy ARP is similar to proxy ARP. It allows the router to answer an ARP request on
an interface for a subnet that is not provisioned on that interface. This allows the router to
forward to the other subnet on behalf of the requester. To distinguish remote proxy ARP from
local proxy ARP, local proxy ARP performs a similar function but only when the requested IP
is on the receiving interface.
Default
no remote-proxy-arp
secondary
secondary command
Item
Description
Syntax
secondary {ip-address/mask | ip-address netmask} [broadcast all-ones | host-ones]
[igp-inhibit]
no secondary ip-address
Context
configure>service>vprn>interface
Description
Use this command to assign up to 255 secondary IP addresses to the interface. Each address
can be configured in an IP address, IP subnet or broadcast address format.
Default
None
3HH-11985-AAAA-TQZZA
Virtual Private Routed Network Service
475