Ies Features - Nokia 7302 Manual

Internet Enhanced Service

6.3 IES Features

6.3.1
IES customer IP interfaces can be configured with most of the same options found
on the core IP interfaces. The advanced configuration options supported are:
•
•
•
•
6.3.2
Only IP filter policies and IPv6 filter policies can be applied to IES services.
6.3.3
ISAM supports non-stop routing for the following protocols in a duplex NT
configuration:
•
•
•
•
358
IP Interfaces
Secondary IP addresses
ICMP Options
PIM
IGMP
The following configuration restrictions apply:
Note —
•
PIM and IGMP are mutual exclusive
•
for PIM and IGMP it is required that the underlaying IP
interface is on top of the virtual port
•
enabling of IGMP may be refused when there is an
associated v-VPLS that has IGMP-snooping enabled
•
Enabling of PIM shall be refused when one or more of the
following conditions is not satisfied:
•
associated v-VPLS must have exactly one SAP
•
SAP of the associated v-VPLS must be on top of a regular
port
Filter Policies
Duplex support
static routes, IP interfaces and ARP
routing protocols: OSPF, IS-IS, BGP, PIM-SSM
DHCPv4 and DHCPv6 state information
QoS, ACLs and security configuration (i.e., filters)
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13