Table 525 Med-Out Command - Nokia 7302 Manual

Virtual Private Routed Network Service
(2 of 2)
7.10.9.28
Table 525
514
Item Description
Parameters drop-peer — Sends a notification to the remote peer and drops the session.
discard-route — Discards routes received with loops in the AS path.
ignore-loop — Ignores routes with loops in the AS path but maintains peering.
off — Disables loop detection.
med-out
med-out command
Item Description
Syntax med-out {number | igp-cost}
no med-out
Context configure>service>vprn>bgp
configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
Description This command enables advertising the Multi-Exit Discriminator (MED) and assigns the value
used for the path attribute for the MED advertised to BGP peers if the MED is not already set.
The specified value can be overridden by any value set via a route policy.
This configuration parameter can be set at three levels: global level (applies to all peers), group
level (applies to all peers in peer-group) or neighbor level (only applies to specified peer). The
most specific value is used.
The no form of the command used at the global level reverts to default where the MED is not
advertised.
The no form of the command used at the group level reverts to the value defined at the global
level.
The no form of the command used at the neighbor level reverts to the value defined at the
group level.
Default no med-out
Parameters number — The MED path attribute value, expressed as a decimal integer.
Values: 0 — 4294967295
igp-cost — The MED is set to the IGP cost of the given IP prefix.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13