Table 690 Shutdown Command; Shutdown - Nokia 7302 Manual

Intelligent services access manager/fttn/fx, fd 100/320gbps nt and fx nt ihub services
Hide thumbs Also See for 7302:
Table of Contents

Advertisement

FD 100/320Gbps NT and FX NT IHub Services Guide
8.7.1.2
Table 690
Issue: 13

shutdown

shutdown command
Item
Description
Syntax
[no] shutdown
Context
configure>mirror>mirror-dest
debug>mirror-source
Description
The shutdown command administratively disables an entity. When disabled, an entity does not
change, reset, or remove any configuration settings or statistics. Many entities must be
explicitly enabled using the no shutdown command.
The shutdown command administratively disables an entity. The operational state of the entity
is disabled as well as the operational state of any entities contained within. Many objects must
be shut down before they may be deleted.
Unlike other commands and parameters where the default state is not indicated in the
configuration file, shutdown and no shutdown are always indicated in system generated
configuration files.
The no form of the command puts an entity into the administratively enabled state.
Default
See Special Cases below.
Special Cases
Mirror Destination - When a mirror destination service ID is shutdown, mirrored packets
associated with the service ID are not accepted from the mirror source or router. The
associated mirror source is put into an operationally down mode. Mirrored packets are not
transmitted out of the SAP. Each mirrored packet is silently discarded. If the mirror destination
is a SAP, the SAP's discard counters are incremented.
The shutdown command places the mirror destination service or mirror source into an
administratively down state. The mirror-dest service ID must be shut down in order to delete
the service ID or SAP association from the system.
The default state for a mirror destination service ID is shutdown. A no shutdown command is
required to enable the service.
Mirror Source - Mirror sources do not need to be shutdown in order to remove them from the
system.
When a mirror source is shutdown, mirroring is terminated for all sources defined locally for
the mirror-dest service ID.
The default state for a mirror source for a given mirror-dest service ID is no shutdown. A
shutdown command is required to disable mirroring from that mirror-source.
3HH-11985-AAAA-TQZZA
Mirror Services
617

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

73307360

Table of Contents