Virtual Private Routed Network Service
7.10.12.25
Table 640
Table
Table 641
(1 of 2)
586
summary
summary command
Item
Description
Syntax
summary [all]
summary [family family] [neighbor ip-address]
Context
show>router>bgp
Description
This command displays a summary of BGP neighbor information.
If confederations are not configured, that portion of the output will not display.
The "State" field displays the global BGP operational state. The valid values are:
Up — BGP global process is configured and running.
Down — BGP global process is administratively shutdown and not running.
Disabled — BGP global process is operationally disabled. The process must be restarted by
the operator.
For example, if a BGP peer is operationally disabled, then the state in the summary table
shows the state 'Disabled'
Parameters
all — Displays BGP peers in all instances.
family family — Specifies the type of routing information to be distributed by the BGP instance.
Values: ipv4 — Displays only those BGP peers that have the IPv4 family enable and not those
capable of exchanging IP-VPN routes.
ipv6 — Displays the BGP peers that are IPv6 capable.
neighbor neighbor —
641
describes the command output fields for a BGP summary.
Show BGP Summary Output
Label
BGP Router ID
AS
Local AS
BGP Admin State
BGP Oper State
Confederation AS
Member Confederations
Number of Peer Groups
Number of Peers
Total BGP Active Routes
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Description
The local BGP router ID.
The configured autonomous system number.
The configured local AS setting. If not configured, then the value is the same as
the AS.
Down — BGP is administratively disabled.
Up — BGP is administratively enabled.
Down — BGP is operationally disabled.
Up — BGP is operationally enabled.
The configured confederation AS.
The configured members of the BGP confederation.
The total number of configured BGP peer groups.
The total number of configured BGP peers.
The total number of BGP routes used in the forwarding table.
Issue: 13