3.16 Global Services Command Reference; Command Hierarchies - Nokia 7302 Manual

Services Overview
•
Duplicate PD Alarm will be cleared in the following scenarios:
•
•
•
•

3.16 Global Services Command Reference

3.16.1
•
•
•
•
•
76
The same DHCPv6 PD is delegated to two different devices
In this scenario, the PD is not delegated to the second
Note —
device, since it is considered to be an invalid delegation.
When the received IGP route is withdrawn by the IGP routing protocol
When the lease time for a DHCPv6 PD entry expires
When the device goes offline
When an administrator manually clears an alarm by clearing the DHCPv6
lease-state entry using the CLI command provided.
Command: clear service id <service-id no> dhcp6 lease-state
For offline notification to be processed properly, it is
Note 1 —
expected that prefix-stability is enabled in the relevant
interface.
DPOE offline notification will be sent to IHUB through
Note 2 —
SNMP, and therefore SNMP context "ihub" must be configured
in Core-0.
When a route is received from more than one IGP
Note 3 —
routing protocol, an alarm will be generated when an IGP route
is received, and cleared when an IGP route is withdrawn.

Command Hierarchies

Customer Management Commands
Ethernet CFM Global Commands
Ethernet Ring Global Commands
Show Commands
Tools
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13