Power Window Timer Function - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Table of Contents

Advertisement

Main switch
The main switch located on the driver's door
can be used to operate all the windows.
A window can be opened or closed by operat-
ing the corresponding switch.
Press the switch down to open the window,
and pull up the switch to close it.
If the driver's door window switch is fully
pressed down/pulled up, the driver's door
window automatically opens/closes com-
pletely.
If you want to stop the window movement,
operate the switch lightly in the reverse direc-
tion.
1- Driver's door window switch
2- Front passenger door window switch
3- Left rear door window switch
4- Right rear door window switch
5- Lock switch
Sub switch
N00548701137
1- Close
2- Open
Each sub-switch can be used for it's own pas-
senger door window, unless the driver's win-
dow lock switch is activated.
NOTE
 The rear door windows open only half-way.

Power window timer function

The power windows can be run up or down
when the operation mode is in ON.
The door windows can be opened or closed
for a 30-second period after the Plug-in
Hybrid EV System is stopped. However, once
the driver's door or the front passenger's door
is opened, the power windows cannot be
N00548800102
operated.
Lock switch
When this switch is in the lock mode, the pas-
senger door switches cannot be used to open
or close the door windows, and the main
switch will open or close only the driver's
door window. To unlock the switch, press it
again.
1- Lock
2- Unlock
N00548901168
Features and controls
Power window control
N00549001166
5
5-39

Advertisement

Table of Contents
loading

Table of Contents