Table of Contents
Advertisement
To turn on/off the FCM
Every time the operation mode of the power
switch is put in ON, the FCM will automati-
cally be turned on.
To turn off the FCM, press and hold the FCM
ON/OFF switch. The following message and
indicator will appear in the multi-infor-
mation display.
To turn on the FCM again, press and hold the
FCM ON/OFF switch. The
go off, and a current distance mode for the
forward collision warning will be shown in
the multi-information display.
To change forward collision warn-
ing distance
The distance to the vehicle ahead which trig-
gers the forward collision warnings can be
selected from three levels, "FAR", "MID-
DLE" or "NEAR".
To change the distance mode, press the FCM
ON/OFF switch. Every time the switch is
pressed, the distance mode will be switched.
The selected distance mode is shown on the
information screen of the multi-information
display.
When "FAR" is selected
indicator will
When "MIDDLE" is selected
Forward Collision Mitigation System (FCM) (if so equipped)
When "NEAR" is selected
NOTE
Actual distance which triggers the forward
collision warnings will vary depending on
your vehicle speed and the front vehicle
speed. The distance will become longer
when the vehicle speeds are higher.
The distance which will trigger the FCM
braking function cannot be adjusted.
When a problem is detected
When the FCM system determines that its
performance has been degraded, the FCM
will become inoperative.
This can occur when
Foreign objects, such as dirt, snow, ice,
mist or dew condensation adhere to the
windshield of the sensor portion.
In adverse weather conditions, such as
rain, snow, sand storms, etc.
A front vehicle or an oncoming vehicle is
splashing water, snow or dirt.
N00593300022
Features and controls
5-99
5
Advertisement
Table of Contents
