Table of Contents
Advertisement
3. After the seat belt has retracted com-
pletely, insert the latch plate (B) into the
upper slit (F), and then insert the small
latch plate (A) into the lower slit (G).
4. Store the detachable anchor in the storage
pocket on the seatback.
Driver's seat belt
reminder/warning light and
display
A tone and warning light are used to remind
the driver to fasten the seat belt.
If the operation mode of the power switch is
put in ON without the driver's seat belt being
fastened, a warning light will come on and a
tone will sound for approximately 6 seconds
to remind you to fasten your seat belt.
If the vehicle is driven with the seat belt still
unfastened, the warning light will blink and
the tone will sound intermittently until the
seat belt is fastened. At the same time, "FAS-
TEN SEAT BELT" is displayed on the infor-
mation screen in the multi-information
display.
WARNING
In order to reduce the risk of serious
injury or death in an accident, always fas-
ten your own seat belt. Do not allow any-
one to ride in your vehicle unless he or she
N00418401424
is also seated and fastening a seat belt.
Children should additionally be restrained
in a secure child restraint system.
NOTE
If the seat belt subsequently remains unfas-
tened, the warning light and the tone will
issue further warnings each time the vehicle
starts moving from a stop.
Seat and restraint systems
Seat belts
4
4-21
Advertisement
Table of Contents
