Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 287

Indicator light, warning light, and information screen display list
Screen
5
5-166 Features and controls
Cause
 The Blind Spot Warning (BSW) does not operate
normally because there are some malfunctions in the
sensor or the system.
 Foreign objects, such as dirt, snow or ice, adhere to
the bumper surface around the sensor.
 The Rear Cross Traffic Alert (RCTA) is detected the
vehicle approaching your vehicle.
 There is a fault in the sensor.
Do this (Reference)
 Immediately have your vehicle inspected at a certi-
fied Mitsubishi EV dealer.
Refer to "Blind Spot Warning (BSW): When there is
a malfunction in the system or the sensor" on page
5-106.
 Remove a foreign object on the bumper surface
around the sensor.
When the warning display does not disappear after
having cleaned the bumper surface around the sen-
sor, contact a certified Mitsubishi EV dealer.
Refer to "Blind Spot Warning (BSW): When there is
a foreign objects on the sensor" on page 5-106.
 Pay special attention to the rear of your vehicle.
Refer to "Rear Cross Traffic Alert (RCTA)" on page
5-107.
 Contact a certified Mitsubishi EV dealer.
Refer to "Forward Collision Mitigation System
(FCM): When a problem is detected" on page 5-99.
Refer to "Lane Departure Warning System (LDW):
System problem warning" on page 5-112.
Refer to "Automatic High Beam (AHB): System
problem warning" on page 5-182.