Table of Contents
Advertisement
SET - switch
Push down and hold the SET - switch (B)
while driving at the set speed, and your speed
will slow down gradually.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To slow down your speed in small amounts,
push down the SET - switch (B) for less than
approximately 1 second and release it.
Each time you push down the SET - switch
(B), your vehicle will slow down by approxi-
mately 1 mph (1.6 km/h).
Brake pedal
While driving at the set speed, use the brake
pedal, which disengages the cruise control,
then push down the SET - switch (B) and
release the switch momentarily to set a new
desired cruising speed.
Cruise control (if so equipped)
To temporarily increase or
decrease the speed
To temporarily increase the speed
Depress the accelerator pedal as you would
normally. When you release the pedal, you
will return to your set speed.
NOTE
In some driving conditions, the set speed
driving may be deactivated. If this happens,
refer to "To activate" on page 5-79 and
repeat the speed setting procedure.
Features and controls
N00541701095
5
5-81
Advertisement
Table of Contents
