Headlight Flasher; Automatic High Beam (Ahb) - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Combination headlights and dimmer switch
5

Headlight flasher

You can flash the high beams by pulling the
lever gently toward you (2). The lights will
go back to normal when you let go. While the
high beam is on, you will see a blue light on
the instrument panel.
NOTE
 You can flash the high beams by pulling the
lever toward you, even if the light switch is
off.
 If you turn the lights off with the head lights
set to high beam illumination, the headlights
are automatically returned to their low-beam
setting when the light switch is next turned
to the " " position.
5-180 Features and controls

Automatic High Beam (AHB)

so equipped)
The Automatic High Beam (AHB) turns the
high beam light on or off automatically
according to surrounding light conditions.
The sensor (A) detects lights, such as the
lights of an oncoming vehicle, a vehicle
ahead or street lights.
N00550001212
WARNING
 Do not rely solely on the AHB. Always
observe surrounding traffic and light con-
ditions. If necessary, manually turn the
high beams on or off.
Refer to "Dimmer
change)" on page 5-179.
How to use the AHB
(if
1. Rotate the light switch to "
N00591300073
or "AUTO" position when the Plug-in
Hybrid EV System is running.
NOTE
 If the headlights are on when the light switch
is in the "AUTO" position, the AHB works.
2. Press the AHB switch.
The AHB is activated and the indicator is
illuminated.
If the AHB switch is pressed again, the
AHB will be deactivated and AHB indica-
tor will go off.
(high/low beam
N00593600067
" position