Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 366

Table of Contents

Advertisement

When the setting has changed, the system
will beep and the indicator light will flash.
• When the setting has changed from
enabled to disabled, the system will beep
three times and the indicator light will
flash three times.
• When the setting has changed from dis-
abled to enabled, the system will beep
two times and the indicator light will
flash three times.
On vehicles equipped with the Smart-
phone Link Display Audio, screen opera-
tions can also be used to change the
setting. Refer to the separate owner's
manual for details.
NOTE
 The factory setting is "Enable automatic air
conditioning control".
 When the defogger switch is pressed, the air
conditioner will run automatically, even if
the system is set to "Disable automatic air
conditioning control", in order to prevent
windows from fogging up.
AUTO switch
When the AUTO switch is pressed, the indi-
cator light (A) comes on and the mode selec-
tion, blower speed adjustment, recirculated/
outside air selection, temperature adjustment,
and air conditioner ON/OFF status are all
controlled automatically. The selected mode
and the blower speed are not shown in the
display.
Dual-zone automatic climate control air conditioner
OFF switch
N00703501042
Press the OFF switch to turn off the air condi-
tioning system.
Comfort controls
N00703601069
7
7-11

Advertisement

Table of Contents
loading

Table of Contents