To Activate Brake Auto Hold - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Brake auto hold
NOTE
 When the brake auto hold system cannot be
used, a buzzer will sound and the message
will appear on the information screen in the
multi-information display.
5
 If the brake auto hold switch is pressed with
the driver's seat belt is not fastened, a buzzer
will sound and the message will appear on
the information screen in the multi-informa-
tion display.
 If any of the following occur while the sys-
tem is standby state, the brake auto hold sys-
tem will be turned off automatically and the
indicator light on the switch goes off.
A buzzer will sound and the message will
appear on the information screen in the
multi-information display.
• When the driver's seat belt is unfastened.
• When the driver's door is opened.
5-70 Features and controls
NOTE
• When there is a malfunction in the system
 If keeping pressing the brake auto hold
switch after setting the brake auto hold to
ON (stand by), the brake auto hold will
return to OFF as a protection function is
operated.
After returning to OFF, the brake auto hold
will not be switched to ON (Stand by) even if
the brake auto hold switch is pressed. To set
the brake auto hold to ON, restart the Plug-in
Hybrid EV system and press the brake auto
hold switch again.

To activate brake auto hold

When the vehicle is stopped by depressing
the brake pedal with the select position in any
position other than "P" (PARK) or "R"
(REVERSE), the brake auto hold activates
and the vehicle will be held stationary.
The brake auto hold indicator light in the
instrument cluster will come on while the
system activates.
CAUTION
 Release the brake pedal only after the brake
auto hold indicator light has illuminated.
NOTE
 If the following operation is performed, the
brake auto hold will be deactivated automati-
cally and the brake auto hold indicator light
in the instrument cluster goes off.
or