Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 264

ECO drive level
Low
Changing the function settings
1. Park your vehicle in a safe place.
Firmly apply the parking brake and press
the electrical parking switch and shift to
the "P" (PARK) position.
2. When you lightly press the multi-informa-
tion meter switch, the information screen
switches to the function setting screen.
Refer to "Information screen" on page
5-135.
CAUTION
 For safety, stop the vehicle before operating.
While driving, even if you operate the multi-
information display switch, the function set-
ting screen is not displayed.
3. Press and hold the multi-information dis-
High
play switch (for approximately 2 seconds
or more) to switch from the setting mode
screen to the menu screen.
N00556801296
NOTE
 To return the menu screen to the function set-
ting screen, press and hold the multi-infor-
mation display switch (for approximately 2
seconds or more).
 If no operations are made within approxi-
mately 30 seconds of the menu screen being
displayed, the display returns to the function
setting screen.
Multi-information display
4. Select the item to change on the menu
screen and change to the desired setting.
For further details on the operation meth-
ods, refer to the following sections.
Refer to "Changing the reset mode for
average fuel consumption" on page 5-144.
Refer to "Changing the fuel consumption
display unit" on page 5-144.
Refer to "Changing the temperature unit"
on page 5-145.
Refer to "Changing the display language"
on page 5-146.
Refer to "Changing the language on other
system to match the multi-information
display" on page 5-146.
Refer to "Operation sound setting" on
page 5-147.
Refer to "Changing the time until "REST
REMINDER" is displayed" on page
5-147.
Refer to "Changing the turn signal sound"
on page 5-147.
Refer to "Tire ID set change" on page
5-116.
Refer to "Returning to the factory set-
tings" on page 5-148.
Features and controls
5
5-143