Blower Speed Selection Switch; Temperature Control Switch - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Table of Contents

Advertisement

Dual-zone automatic climate control air conditioner
NOTE
 While EV priority mode is activated, except
in pressing the defogger switch, engine does
not start.
Therefore, the heating performance may not
be sufficiently obtained while EV priority
mode is activated. In such case, cancel EV
priority mode. Refer to "EV switch" on page
5-62.
 Since the air conditioning operation is con-
trolled while the ECO mode is operating,
7
you may feel that effectiveness of the air
conditioner is insufficient. Refer to "ECO
mode switch" on page 5-186.
 Even during ECO mode operation, you can
select normal operation of the air condi-
tioner.
On vehicles equipped with the Smartphone
Link Display Audio, screen operations can
be used to change the setting. Refer to the
separate owner's manual for details.
 In extreme cold, the air conditioning control
panel screen may operate sluggishly. This
does not indicate a problem.
It will disappear when the vehicle interior
temperature rises to a normal temperature.
7-6
Comfort controls

Blower speed selection switch

Press
of the blower speed selection
switch to increase the blower speed.
Press
of the blower speed selection
switch to decrease the blower speed.
The selected blower speed (A) will be shown
in the display.
1- Increase
2- Decrease

Temperature control switch

N00736901235
Press
or
of the temperature control
switch to the desired temperature.
The selected temperature (A) will be shown
in the display.
NOTE
 The temperature value of air conditioner is
switched in conjunction with outside temper-
ature display unit of the multi-information
display.
Refer to "Changing the temperature unit" on
page 5-145.
N00737001477

Advertisement

Table of Contents
loading

Table of Contents