Multi-Information Display; Meter Illumination Control - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Charge zone
Indicates the charging power generated by the
regenerative brake.
The more the needle moves, the more electric
energy is charged.
The needle of the energy usage indicator may
not enter the charge zone when the main drive
lithium-ion battery is close to full charge.
Eco/Power zone
Charge zone

Meter illumination control

Each time you press this button, there is a
sound and the brightness of the instruments
changes.
1- Brightness level
2- Rheostat illumination button
NOTE
 You can adjust to 8 different levels for when
the front side-marker lights are illuminated
and when they are not.
 The light switch is in a position other than
the "OFF" position and it is sufficiently dark
outside the vehicle, the meter illumination
switches automatically to the adjusted
brightness.
 The brightness level of the instruments is
stored when the operation mode of the power
switch is put in OFF.

Multi-information display

NOTE
 If you press and hold the button for longer
N00554901307
than approximately 2 second when the front
side-marker lights are illuminated, the
brightness level changes to the maximum
level. Pressing and holding the button for
longer than approximately 2 second again
returns the brightness level to the previous
level.
Multi-information display
The multi-information display displays warn-
ings, the odometer, trip odometer, average
fuel consumption, EV cruising range, total
cruising range, EVHV driving rate, energy
flow, etc.
It is also possible to change elements such as
the language and units used on the multi-
information display.
Features and controls
5
N00555001435
5-129