Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 58

Table of Contents

Advertisement

Symptom
Quick charge is discontin-
Charging is stopped by the quick
ued.
charge timer.
Charging stops at 80 % capacity.
The power supply for the quick char-
ger is off.
The charging indicator is
Quick charging has not finished nor-
continuously blinking even
mally.
if the quick charge connec-
tor is not connected into the
quick charge port when you
start the Plug-in Hybrid EV
system after quick charging.
Plug-in Hybrid EV System
The vehicle have a malfunction.
does not start after quick
charging.
Possible cause
Charging will stop depending on the timer function setting of the quick
charge device. If you need to charge the main drive lithium-ion battery
more, start the charging procedure again.
Charging is designed to stop when the main drive lithium-ion battery
capacity reaches 80 %. If you need to charge the main drive lithium-ion
battery more than 80 %, start the charging procedure again.
Check whether the power supply for the quick charger is off.
Consult an administrator or a maker of the quick charger.
Perform quick charging again and finish it normally or contact a certified
Mitsubishi EV dealer.
Contact a certified Mitsubishi EV dealer.
If you need to push the vehicle, put the operation mode of the power
switch in ON and put the select position in the "N" (NEUTRAL) position.
Charging troubleshooting guide
Possible solution
General information/Charging
3
3-39

Advertisement

Table of Contents
loading

Table of Contents