Turn Signal Lever - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

WARNING
 To avoid distraction while driving, always
perform headlight adjustments before
vehicle operation.
NOTE
 Start adjusting when the knob is at the "0"
position (when the beam is at its highest).
 Keep the knob in the "0" position except
when using the knob to lower the headlight
beam angle.
 Always return the knob to the "0" position
when the load is removed and the people
have left the vehicle.

Turn signal lever

When changing lanes, or to making a gradual
turn, hold the lever in the "lane change" posi-
tion (1). It will return to the neutral position
when you let go. Use the full position (2)
when making a normal turn. The lever will
return to the neutral position when the turn is
complete. There may be times when the lever
does not return to the neutral position. This
usually happens when the steering wheel is
turned only slightly. You can easily return the
lever by hand.
Also, when you move the lever to (1) slightly
then release it, the turn signal lights and the
indicator light in the instrument cluster will
flash three times.
NOTE
 A light in the instrument panel flashes to
show when the front and rear turn signal
lights are working properly.
If this light flashes faster than usual, check
N00522601617
for a burned out turn signal light bulb or mal-
functioning connection in the signal.
If the panel light does not come on when the
lever is moved, check for a blown fuse or a
burned out bulb in the panel.
Have the system inspected by a certified Mit-
subishi EV dealer.
 It is possible to modify functions as follows:
• Deactivate the turn signal light 3-flash
function for lane changes.
• Adjust the time required to operate the
lever for the 3-flash function.
Turn signal lever
NOTE
See a certified Mitsubishi EV dealer for
details.
For vehicles equipped with the Smartphone
Link Display Audio, adjustments can be
made using screen operations. For further
details, refer to the separate owner's manual.
 It is possible to change the tone of a sound-
ing buzzer as the turn signal lights flash.
Refer to "Changing the turn-signal sound"
on page 5-147.
Features and controls
5
5-185