Fcm Braking Function - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Table of Contents

Advertisement

Forward Collision Mitigation System (FCM) (if so equipped)

FCM braking function

When the FCM judges that a collision with
the vehicle or the pedestrian straight-ahead is
imminent, the FCM will automatically apply
moderate braking to warn the driver to apply
the brakes immediately.
5
If the FCM judges that the collision is highly
unavoidable, it will automatically apply
emergency braking to reduce the severity of
the collision and, if possible, to avoid the col-
lision.
When the FCM applies emergency braking, a
buzzer sounds and a warning message is dis-
played in the information screen of the multi-
information display.
The FCM braking function operates when the
following vehicle speed:
 Against a vehicle: Approximately 3 mph
(5 km/h) to 50 mph (80 km/h)
 Against a pedestrian: Approximately 3
mph (5 km/h) to 40 mph (65 km/h)
5-96
Features and controls
WARNING
 If the ASC is turned off, the FCM braking
N00577700060
function will not operate. Refer to "Active
stability control (ASC)" on page 5-76.
 If the brake pedal is not depressed within
2 seconds after your vehicle has been
stopped by the FCM, a warning buzzer
will sound and the brakes activated by the
FCM will automatically be released.
Apply the brakes as necessary to keep
your vehicle stationary.
 The FCM will not activate and will not
provide either warning or braking in cer-
tain situations. Some of these include:
• When the select position is in the "P"
(PARK) or "R" (REVERSE) position.
• When an object other than a vehicle or a
pedestrian is in front.
• When the FCM has detected a problem
in the system.
• When a vehicle or a pedestrian suddenly
cuts in front of your vehicle.
• When the vehicle in front is moving at a
speed much lower than your vehicle's
speed.
 The FCM may or may not detect a motor-
cycle, bicycle or wall depending on the sit-
uation. The FCM is not designed to detect
these objects.
 The forward collision warning function
and/or the FCM braking function may not
activate in certain situations. Some of
these include:
WARNING
• When a vehicle suddenly appears just in
front of your vehicle.
• When a vehicle cuts into your path at a
close distance.
• When a vehicle ahead is not completely
in your path.
• When your vehicle changed lanes, and
your vehicle approached immediately
behind the vehicle ahead.
• When a vehicle ahead is towing a trailer.
• When a vehicle ahead is a truck loaded
with freight that protrudes rearward
from the cargo bed.
• When the height of a vehicle ahead is
extremely low or its road clearance is
extremely high.
• When a vehicle ahead is extremely dirty.
• When a vehicle ahead is covered with
snow.
• When a vehicle ahead has a large glass
surface.
• When a vehicle ahead does not have
reflectors (light reflector) or the position
of the reflector is low.
• When a vehicle ahead is a car carrier or
a similar shaped vehicle.
• When accelerating and decelerating
quickly.
• When driving on a slippery road covered
by rain water, snow, ice, etc.
• When driving on a road with alternating
up and down steep slopes.

Advertisement

Table of Contents
loading

Table of Contents