Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 299

Combination headlights and dimmer switch
NOTE
 When it rains, or when the vehicle has been
washed, the inside of the lens sometimes
becomes foggy. This is the same as when
window glass mists up on a humid day, and
does not indicate a problem. When the light
is switched on, the heat will dry out the fog.
5
However, if water collects inside the light,
have it checked by a certified Mitsubishi EV
dealer.
Rotate the switch to operate the lights.
The combinations of switch operations and
illuminated lights differ in accordance with
the following conditions.
[When the Plug-in Hybrid EV System is
started, and the parking brake is released]
The daytime running lights illumi-
OFF
nated
5-178 Features and controls
The daytime running lights illumi-
nated (when it is light outside the
vehicle)
AUTO
Headlights and other lights turn on
and off automatically in accor-
dance with outside light level.
The daytime running lights illumi-
nated
Tail, front and rear side-marker
lights, license plate, instrument
panel lights and downlight on
Headlights and other lights on
NOTE
 Once the daytime running light come on,
they do not go out until the operation mode
is changed to OFF or ACC.
[When the Plug-in Hybrid EV System is not
running, or when the Plug-in Hybrid EV Sys-
tem is running but the parking brake is not
released]
The Plug-in Hybrid EV System starts when
the lights are off.
OFF All lights off
Headlights and other lights turn on
AUTO and off automatically in accor-
dance with outside light level.
Parking, tail, front and rear side-
marker lights, license plate, instru-
ment panel lights and downlight on
Headlights and other lights on
NOTE
 The sensitivity of the automatic on/off con-
trol can be adjusted.
For further information, please contact a cer-
tified Mitsubishi EV dealer.
On vehicles equipped with the Smartphone
Link Display Audio, screen operations can
be used to make the adjustment.
Refer to the separate owner's manual for
details.
 Do not cover the sensor (A) for the automatic
on/off control by affixing a sticker or label to
the windshield.
 If the lights do not turn on or off with the
switch in the "AUTO" position, manually
operate the switch. Have the system checked
by a certified Mitsubishi EV dealer.