Light Auto-Cutout Function (Headlights And Other Lights); Led Headlight Warning Light; Headlight Reminder Buzzer; Dimmer (High/Low Beam Change) - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Light auto-cutout function
(headlights and other lights)
 If the operation mode is changed to OFF
or ACC and the driver's door is opened
with the combination headlights and dim-
mer switch in the " " or "
the lights automatically turn off.
 If the operation mode is changed to OFF
or ACC and the driver's door is not
opened with the combination headlights
and dimmer switch in the "
position, the lights automatically turn off
after approximately 3 minutes.
NOTE
 The light auto-cutout function can be deacti-
vated.
See a certified Mitsubishi EV dealer for
details.
For vehicles equipped with the Smartphone
Link Display Audio, adjustments can be
made using screen operations. For further
details, refer to the separate owner's manual.
When you want to keep the lights
on:
If the combination headlights and dimmer
switch is turned to the " " or "
tion again after stopping the Plug-in Hybrid
EV System, the approximately 3-minute
auto-cutout function described above will not
work. The lights (the parking lights, tail lights
N00532601665
and license plate lights) will stay on and will
not turn off automatically.
" position,

LED headlight warning light

so equipped)
This warning light will illuminate when there
" or " "
is a malfunction in the LED headlights.
NOTE
 If the warning light illuminates, there may be
a malfunction in the unit. Contact a certified
Mitsubishi EV dealer to have the system
checked.
" posi-
Combination headlights and dimmer switch

Headlight reminder buzzer

If the driver's door is opened with the opera-
tion mode is put in OFF or ACC, or if the
operation mode is changed to OFF while the
lights are on, the tone will sound to remind
you to turn off the lights.
(if
In either case, the lights will turn off automat-
ically and so will the tone. Or you can turn
N00584500031
the light switch to the "OFF" position to stop
the tone.
Dimmer (high/low beam
change)
To change the headlights from high beam to
low beam and vice versa, pull the turn signal
lever to (1). Switch the headlights to low
beam as a courtesy whenever there are
oncoming vehicles, or when there is traffic
moving ahead of you. An illuminated blue
light in the instrument cluster indicates when
the headlights are on high beam.
Features and controls
N00549801249
5
N00549901178
5-179