Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 281

Indicator light, warning light, and information screen display list
Screen
5
5-160 Features and controls
Cause
 The engine is overheated.
 The seat belt is not fastened when the operation
mode is in ON.
 There is a fault in the fuel system.
 The vehicle is being driven with the parking brake
still applied.
 The brake fluid level is low.
 There is a fault in the brake system.
 When the brake pedal has been repeatedly depressed
over a short period of time, the brake warning light
may come on and the brake warning buzzer may
sound, and this warning may be displayed.
Do this (Reference)
 Park the vehicle in a safe place and take corrective
measures.
Refer to "Engine overheating" on page 8-4.
 Wear your seat belt properly.
Refer to "Driver's seat belt reminder/warning light
and display" on page 4-21.
 Contact a certified Mitsubishi EV dealer to have the
system checked.
 Release the parking brake. Refer to "Brake warning
display" on page 5-176.
 Park the vehicle in a safe place and inspect it.
 If the light still illuminates after the inspection, con-
tact a certified Mitsubishi EV dealer for assistance.
Refer to "Brake warning display" on page 5-176.
 If the this warning display is disappeared and brake
warning light goes out and the buzzer stops a few
seconds after stopping brake operation, there is no
abnormality.