To Activate Acc Control; When Acc Detects No Vehicle In Front Within The Set Distance - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Table of Contents

Advertisement

Adaptive Cruise Control System (ACC) (if so equipped)

To activate ACC control

With the ACC turned on, push down the
"SET -" switch while driving, and when your
vehicle reaches your desired speed, release
the "SET -" switch. The ACC will activate
and initiate the speed control to maintain the
5
set speed.
The set indicator comes on, the set speed is
indicated and the following distance indicator
changes to the 'active' display. Also a buzzer
will sound.
5-86
Features and controls
You can set the speed anywhere from approx-
imately 25 mph (40 km/h) to 110 mph (180
km/h).
While a vehicle in front is being detected and
your vehicle speed is between approximately
6 mph (10 km/h) and 25 mph (40 km/h), you
can activate the ACC. In this case, the set
speed will be set at 25 mph (40 km/h).
The ACC cannot otherwise be activated while
your vehicle is traveling less than 25 mph (40
km/h) or greater than 110 mph (180 km/h).
NOTE
 When any of the following conditions are
present, the ACC will not activate.
• When your vehicle speed is lower than
approximately 6 mph (10 km/h) or greater
than 110 mph (180 km/h).
• When your vehicle is driven at speeds
between approximately 6 mph (10 km/h)
and 25 mph (40 km/h) and the ACC is not
detecting a vehicle in front.
• When ASC is in the OFF position.
• While ABS, ASC or TCL is activated.
• When the select position is in the "P"
(PARK), the "R" (REVERSE) or the "N"
(NEUTRAL) position.
• While the brake pedal is depressed.
• While the parking brake is applied.
• When the ACC system has judged that the
performance for detecting a front vehicle is
degraded.
NOTE
• When an abnormality in the ACC system
has been detected.
When ACC detects no vehicle
in front within the set distance
The speed of your vehicle will be maintained
at the speed you have set. The speed can be
set between approximately 25 mph (40 km/h)
and 110 mph (180 km/h).
NOTE
 If the vehicle speed exceeds the set speed on
a down slope, the system will automatically
apply the brake to maintain the vehicle set
speed.
N00581300025

Advertisement

Table of Contents
loading

Table of Contents