Customer F.a.s.t.-Key Programming - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

For you to register the ID code yourself, fol-
low the "Customer F.A.S.T.-key program-
ming" procedure below.
If you choose to have a certified Mitsubishi
EV dealer register the ID code, take your
vehicle and all remaining F.A.S.T.-keys to a
certified Mitsubishi EV dealer.
NOTE
 You are provided with two F.A.S.T.-keys, but
you may register up to four F.A.S.T.-keys.
You can obtain blank F.A.S.T.-keys specially
cut for your vehicle from a certified Mitsubi-
shi EV dealer.
Customer F.A.S.T.-key program-
ming (Except for vehicles sold in
Canada)
You can program new F.A.S.T.-keys to the
system if you have two valid (already regis-
tered) F.A.S.T.-keys and a blank (not regis-
tered) F.A.S.T.-key.
For F.A.S.T.-key programming, follow the
procedures below.
1. Open the driver's door.
NOTE
 Keep the driver's door open until F.A.S.T.-
key programming is finished. Do not open or
close other doors.
2. While carrying the first valid F.A.S.T.-
key, put the operation mode in ON. (Per-
form the following procedure within 30
seconds.)
3. Insert the new F.A.S.T.-key into the key
slot in the illustrated direction.
N00561201269
4. With the first valid F.A.S.T.-key, press the
UNLOCK button for 4 to 10 seconds and
press the LOCK button during this time.
5. Release in sequence the LOCK and
UNLOCK buttons within 10 seconds of
pressing the LOCK button in step 4. (Per-
form the following procedure within 30
seconds.)
Free-hand Advanced Security Transmitter (F.A.S.T.-key)
6. With the second valid F.A.S.T.-key, press
the UNLOCK button for 4 to 10 seconds
and press the LOCK button during this
time.
7. Release in sequence the LOCK and
UNLOCK buttons within 10 seconds of
pressing the LOCK button in step 6. The
immobilizer display on the information
screen in the multi-information display
will blink.
When registration of ID code is complete,
the buzzer will sound three times and the
immobilizer display will come on for 30
seconds.
If an error occurs, F.A.S.T.-key program-
ming will be terminated and the buzzer
will sound for 3 seconds.
NOTE
 F.A.S.T.-key programming will be termi-
nated if the operation mode is put in OFF
before the immobilizer display starts blink-
ing.
8. If you wish to register another F.A.S.T.-
key, repeat the process from step 1 after
the operation mode is put in OFF.
Features and controls
5
5-17