Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 91

Seat belts
To attach
1. Pull out the detachable anchor plate (C)
from the storage pocket on seat back
cushion.
2. Pull out the small latch plate (A) and then
4
pull out the latch plate (B) by tilting it as
shown in the illustration.
NOTE
 Pulling out the latch plate by force may dam-
age the headliner.
4-20 Seat and restraint systems
3. Pull the small latch plate (A) slowly and
insert it into the detachable anchor plate
until a click is heard. Make sure that the
seat belt is not twisted.
NOTE
 If the seat belt locks up and cannot be pulled
out, pull it once with force and let it retract
all the way.
Then, pull the belt out slowly once again.
 The seat belt can be buckled up by inserting
the latch plate (B) into the buckle (D) like
other seat belts.
 If the seat belt switch to the ALR child
restraint installation function and cannot be
pulled out, detach the latch plate (B).
Refer to "Installing a child restraint system
using the seat belt" on page 4-30.
To detach
1. While holding the seat belt, insert a metal
plate, such the latch plate of the seat belt
or a key, into the slit (E) on the detachable
anchor (C) and release the center seat belt
from the detachable anchor.
2. Retract the seat belt slowly by holding the
seat belt.
NOTE
 If the seat belt is not held, the seat belt will
rapidly retract. This could cause damage to
the interior trim.