Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 175

Selector Lever (Joystick type)
The "B" (REGENERATIVE BRAKE) posi-
tion can only be selected while the shift posi-
tion is in "D" (DRIVE) position. When the
selector lever is moved to the "B" position,
the regenerative brake force will become
stronger. When the selector lever is again
moved to the "B" position, the maximum
regenerative brake force will be used.
5
To return to the "D" position, use the selector
lever to select the "D" position.
NOTE
 If you move the selector lever to "B"
(REGENERATIVE BRAKE) position twice
too quickly, the maximum regenerative brake
force may not be used.
WARNING
 Do not replace the selector lever knob
with anything other than a Mitsubishi
Motors Genuine part. In addition, do not
hang or attach an object to the selector
lever. The selector lever may unintention-
ally move resulting in an accident.
5-54 Features and controls
WARNING
 Before moving the selector lever to the
"D" (DRIVE) or "R" (REVERSE) posi-
tion from the "P" (PARK) or "N" (NEU-
TRAL) position, always depress the brake
pedal firmly with your right foot and
never depress the accelerator pedal. Fail-
ure to follow this recommendation could
result in abrupt, unintended vehicle move-
ment and/or damage to vehicle compo-
nents.
NOTE
 While the Adaptive Cruise Control system
(ACC) is operating, the level of the regenera-
tive brake cannot be changed by shifting to
the "B" (REGENERATIVE BRAKE) posi-
tion or operating the regenerative braking
level selector.
 When operating the selector lever, always
make sure that the select position indicator
on the multi-information display changes to
the selected select position.
 If the following operation is performed, a
buzzer may sound and the select position
may automatically be shifted to the "N"
(NEUTRAL) position.
• If the Electrical parking switch is pressed
while the vehicle is in motion.
• If the selector lever is moved to the "R"
(REVERSE) position while the vehicle is
moving forward.
NOTE
• If the selector lever is moved to the "D"
(DRIVE) position while the vehicle is mov-
ing backward.
• If the selector lever is moved to the "B"
(REGENERATIVE BRAKE) position after
shifted to the "R" position.
 If the following operation is performed using
the selector lever, a buzzer will sound and
the selector lever operation will be canceled.
• While the select position is in the "P" posi-
tion, the selector lever is moved without
depressing the brake pedal.
• While the select position is in the "P" or
"N" position, the selector lever is moved to
the "B" position.
• When the operation mode of the power
switch is in ON and the ready indicator is
not illuminated, the selector lever is moved
to the "D" (DRIVE) or "R" (REVERSE)
position.
 If the selector lever is moved and held for
approximately 10 seconds or longer, a buzzer
will sound. The buzzer will stop when the
selector lever is released.
 If the driver's door is opened while the vehi-
cle is stationary with the shift position in any
position other than "P" or the vehicle is mov-
ing slowly and the ready indicator is illumi-
nated, a warning buzzer will sound. The
buzzer will stop sounding when the driver's
door is closed or the electrical parking
switch is pressed to shift to the "P" position.