To Cancel Acc Control; To Temporarily Accelerate The Vehicle - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

By using the brake pedal:
By depressing the brake pedal while the ACC
is activated, the ACC control is canceled and
your vehicle speed will decrease.
At the point where the vehicle speed reaches
your desired speed, push down and release
the "SET -" switch; the new speed is then set
in the system.
NOTE
 The ACC control will not resume after
releasing the brake pedal.
To temporarily accelerate the
vehicle
Simply depress the accelerator pedal to tem-
porarily accelerate the vehicle. Releasing the
pedal automatically slows down the vehicle
to the set speed and ACC restarts its control.
WARNING
 The ACC braking control and approach
alarm functions will not work while the
accelerator pedal is depressed.
NOTE
 The set speed indication on the display turns
to "---" when the accelerator pedal is
depressed. This indication remains as long as
the pedal is in a depressed position.
 In certain conditions, the braking control and
alarming functions of ACC may not work for
a short while after releasing the accelerator
pedal.
N00582800027
Adaptive Cruise Control System (ACC) (if so equipped)

To cancel ACC control

There are two ways to cancel the ACC con-
trol.
 By pressing the "CANCEL" switch.
 By depressing the brake pedal.
NOTE
 You can also cancel the ACC control by
pressing the "ACC ON/OFF" switch. If this
switch is pressed while the ACC is "ON",
the ACC will be turned off.
Features and controls
N00581700087
5
5-91