Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 84

To fold the rear seat
1. When folding the left side rear seat, store
the seat belt for the middle seating posi-
tion of the rear seat.
Refer to "Detachable center seat belt for
rear seat" on page 4-19.
2. Lower the head restraint for rear middle
seating position to its lowest position.
Refer to "Head restraints" on page 4-10.
3. Pull the strap (A), then fold forward the
head restraints for rear outside seating
position.
4. Pull the strap (B), then flip the seat cush-
ion forward.
Making a cargo area
CAUTION
 Do not fold the rear seat while the 120 V AC
power supply on the back of the floor con-
sole box is being used or while the lid of the
120 V AC power supply is open. Doing so
may damage the 120 V AC power supply, its
lid, a connected appliance and/or the rear
seat. Also, this could lead to an electrical
shock.
5. Fold forward the seat belt buckle.
Seat and restraint systems
4
4-13