When There Is A Malfunction In The Bsw System Or The Sensor; When The Sensor Is Temporarily Not Available; When There Is A Foreign Object On The Sensor - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Blind Spot Warning (BSW) (with Lane Change Assist) (if so equipped)
When there is a malfunction in the
system or the sensor
5
When the warning display appears, the BSW
does not operate normally because there are
some malfunctions in the system or the sen-
sor. Have the vehicle inspected at a certified
Mitsubishi EV dealer as soon as possible.
NOTE
 When the warning display appears, the BSW
will be deactivated.
5-106 Features and controls
When the sensor is temporarily
not available
N00592700029
When the warning display appears, the sensor
is temporarily not available for some reason
such as the environmental condition or
increase of the sensor temperature. When the
warning display does not disappear after
waiting for a while, contact a certified Mit-
subishi EV dealer.
When there is a foreign objects on
the sensor
N00592800020
When the warning display appears, the sensor
cannot detect a vehicle traveling side by side
or an approaching vehicle, because foreign
objects, such as dirt, snow or ice, adhere to
the bumper surface around the sensor.
Remove a dirt, freezing or foreign material on
the bumper surface around the sensor.
When the warning display does not disappear
after having cleaned the bumper surface
around the sensor, contact a certified Mitsubi-
shi EV dealer.
N00592900021