Keyless Entry System - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Free-hand Advanced Security Transmitter (F.A.S.T.-key)
9. When all F.A.S.T.-keys are registered,
remove the F.A.S.T.-key from the key
slot.
NOTE
 The immobilizer display will go off immedi-
ately if the operation mode is put in OFF.
5
 Perform the operation when the interrupt dis-
play screen is not showing. The interrupt dis-
play screen may prevent you from seeing the
immobilizer display.
 It is not possible to register a F.A.S.T.-key if
the immobilizer display goes off during the
procedure.
5-18 Features and controls

Keyless entry system

Press the remote control transmitter buttons
to lock or unlock the doors and the liftgate.
It can also help you signal for attention by
setting off the panic alarm.
Type 1
Type 2
1- LOCK (
) button
2- UNLOCK (
) button
3- Power liftgate button (if so equipped)
4- PANIC button
5- Operation indicator light
6- Charging timer cancel switch (if so
equipped)
NOTE
 For the operation of the power liftgate button
N00515501308
(3), refer to "Power liftgate" on page 5-27.
 For the operation of the Charging timer can-
cel switch (6), refer to "MITSUBISHI
Remote Control" on page 3-42.
 On vehicles equipped with the mirror retrac-
tor switch, the outside rearview mirrors auto-
matically retract or extend when the doors
and the liftgate are locked or unlocked using
the remote control transmitter buttons.
Refer to "Features and controls: Outside
rearview mirrors" on page 5-49.
To lock
Press the LOCK button (1) to lock all the
doors and the liftgate.
The turn signal lights will also blink once.
NOTE
 On vehicles equipped with the mirror retrac-
tor switch, the outside rearview mirrors auto-
matically retract when the LOCK button (1)
is pressed.
 If you press the LOCK button (1) twice, the
horn will sound once.