Warning Activation; Changing The Operation Mode; Acc Power Auto-Cutout Function - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Table of Contents

Advertisement

Changing the operation mode

If you press the power switch without press-
ing the brake pedal while the vehicle is sta-
tionary, you can change the operation mode
in the order of OFF, ACC, ON, OFF.

Warning activation

With the F.A.S.T.-key, warnings are given through buzzers and displays on the information screen in the multi-information display in order to pre-
vent mistaken operations or vehicle theft.
When a warning operates, be sure to check the vehicle and the F.A.S.T.-key. A warning is also displayed if there is a problem in the F.A.S.T.-key.
CAUTION
 When the Plug-in Hybrid EV System is not
N00568001048
operating, put the operation mode in OFF.
Leaving the operation mode in ON or ACC
for a long time when the Plug-in Hybrid EV
System is not operating may cause the 12 V
starter battery to be discharged, making it
impossible to start the Plug-in Hybrid EV
System.
 When the 12 V starter battery is discon-
nected, the current operation mode is memo-
rized. After reconnecting the 12 V starter
battery, the memorized mode is selected
automatically. Before disconnecting the 12 V
starter battery for repair or replacement,
make sure to put the operation mode in OFF.
Be careful if you are not sure which opera-
tion mode the vehicle is in when the 12 V
starter battery is run down.
 The operation mode cannot be changed from
OFF to ACC or ON if the F.A.S.T.-key is not
detected to be in the vehicle. Refer to "Oper-
ating range for starting the Plug-in Hybrid
EV System and changing the operation
mode" on page 5-6.
Free-hand Advanced Security Transmitter (F.A.S.T.-key)

ACC power auto-cutout function

After approximately 30 minutes has elapsed
with the operation mode in ACC, the function
automatically cuts out the power for the audio
system and other electric devices that can be
operated with that mode.
When the power switch is pressed after acti-
vation of ACC power auto-cutout function,
the power is supplied again to those devices.
NOTE
 It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to approximately 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult a
certified Mitsubishi EV dealer.
On vehicles equipped with the Smartphone
Link Display Audio, screen operations can
be used to make the adjustment.
Refer to the separate owner's manual for
details.
Features and controls
N00568101081
5
N00503501255
5-11

Advertisement

Table of Contents
loading

Table of Contents