Table of Contents
Advertisement
License plate lights
1. When removing the light unit (A), push it
toward the left side of the vehicle body.
2. Use a screw driver to gently pry up the tab
(B) and remove the lens.
NOTE
Wrap a cloth around the tip of the screw-
driver to keep from scratching the lens.
3. Pull the bulb out of the socket.
N00944001468
4. To install the bulb, perform the removal
steps in reverse.
NOTE
When mounting the light unit, insert tab (C)
first then align tab (D) with its hole.
Vehicle care precautions
High-mounted stop light
NOTE
The high-mounted stop light uses an LED
instead of the bulb. Check with a certified
Mitsubishi EV dealer when the light needs to
be repaired or replaced.
Vehicle care precautions
In order to maintain the value of your vehicle,
perform regular maintenance using the proper
materials and procedures. Be sure to use only
those materials and procedures that meet your
local environmental pollution control regula-
tions. Choose the materials you will use care-
fully, to be sure that they do not contain
corrosives. If you are not sure, contact a certi-
fied Mitsubishi EV dealer for help in choos-
ing these materials.
Vehicle care and maintenance
N00943901141
N00945101206
9
9-37
Advertisement
Table of Contents
