Cruise Control Switch; Acc Indicators - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Adaptive Cruise Control System (ACC) (if so equipped)

Cruise control switch

5
1- "ACC ON/OFF" switch
Used to turn on and off the ACC sys-
tem.
2- "SET -" switch
Used to set a desired speed or to reduce
the set speed.
3- "RES +" switch
Used to resume the control function
after cancelling the ACC or the conven-
tional cruise control.
Also used to increase the set speed.
4- "CANCEL" switch
Used to cancel the control function of
the ACC or the cruise control.
5- ACC distance switch
Used to set or change the following dis-
tance between your vehicle and a vehi-
cle in front.
5-84 Features and controls
NOTE
 When operating the cruise control switches,
N00577000034
press the cruise control switches correctly.
The ACC may be deactivated automatically
if two or more switches of the cruise control
are pressed at the same time.

ACC Indicators

While the ACC is turned on, indicators for
the ACC are shown in the multi-information
display.
1- ACC indicator:
Indicating that the ACC is turned on.
2- Control state indicator:
Indicating that ACC is activated.
3- Set speed indicator:
Indicating the set speed.
If the set speed is not set, "---" is
shown.
4- Front vehicle indicator:
Indicating when the ACC detects a
vehicle ahead.
When a front vehicle is detected while
the ACC is activated, the 'Active' front
vehicle indicator shown in the illustra-
N00577100051
tion below will illuminate.
When a front vehicle is detected while
the ACC is not activated or the ACC is
canceled, the 'Stand by' front vehicle
indicator will illuminate.
Display
Stand by
Vehicle in
front detected
State
Active